petrochemical products

 

TOLUNE (INDUSTRIAL GRADE) OSWAL

Prices
1. Molecular Weight :  92.134
2. Specific Gravityat
a) 15.5/15.5 oC
b) 27/27 oC		 :  0.865
:  0.853
3. Toiune Content :  96% by weight, min.
4. Distillation Range :  -
5. Colour :  Hazene Units, 40 max
6. Total Sulphur :  0.2% by weight, max
7. Acidity :  None
8. Residue on evaporation :  10 mg/100 ml, max

 

TOLUNE (NITRATION GRADE)

Prices
1. Colour :  Not darker than freshly prepared solution of 0.8 ml of 0.1 N potassium Dichromate & 12 ml of 0.1 N of Cobalt Sulphate made upto 1000 ml, with water.
2. Specific Gravity at
a) 15.5 / 15.5 oC gm/ml
b) 27oC / 27 oC, gm/ml		 :  0.870 to 0.874
: 0.859 to 0.863
3. Distillation Range :  The difference between temperature (running pts) at which 1 & 96% of the volume taken habe been collected shall not exceed 0.6 oC, when treated sample is tested by standard method.  This range shall include the temperature of 110.6 oC
4. Residue on evaporation mg/100 ml, max :  5
5. Total Sulphar % by wt. Max. :  0.1
6. Hydrogen Sulphide :  To pass test
7. Mercaptan :  Shall give no position reacation
The above confirm to pure Nitration Grade, IS : 534 - 1967 and IS 537 - 1974

 

BENZENE (INDUSTRIAL GRADE) OSWAL

Prices
1. Specific Gravity (15/15 oC) :  0.876 to 0.882
2. Benzene content (By GLC) :  Min 96% by Weight
3. Acidity :  No free Acid
4. Acid Wash Colour :  No. 2 colour std. Max
5. Sulphur Compounds :  100ppm Max
6. Copper Corrosion :  Nil
7. Distillation Range (95%) at 760mm Hg :  80.1 +/- 2 oC

 

BENZENE (NITRATION GRADE)

Prices
1. Colour :  Not Darker than freshly Prepared solution of 0.8 ml 0.1 N Potassium Dichromate & 12 ml of 0.1 N of Cobalt Sulphate made upto 1000 ml with water.
2. Specitic Gravity at
a) 15 oC/15 oC gm/ml
b) 27 oC/27 C gm/ml		 :  0.877 to 0.884
:  0.866 to 0.873
3. Distillation Range :  The difference in temperature (running pts) at which 1 & 96% of the volume taken have been collected shall not exceed 0.5 oC, when treated sample is tested by standard method.
This range shall include the tempetare of 80.1 oC
4. Residue on evaporation mg/100ml Max :  5
5. Total Sulphar :  % wt. Max 0.015
6. Hydrigen Sulphide :  To pass test
7. Mercaptan :  Shall give no positive reaction.
8. Thiophene (as Sulphur) :  0.005% by wt. Max
9. Crystillising Point oC Min :   5.2

 

METHANOL

Prices
1. Methanol Content :  99.9% by Wt, Min
2. Water content :  0.10% by WT, Max
3. Distillation Range :   Not more than 1 oC and shall include 64.6 oC  + 0.1 oC at 760 mm. Hg.
4. Density at 20 oC :  0.7928
5. Acetone :  0.002A% Max
6. Acetone and Aldehydes :  0.003 % Max
7. Acidity as Acetic Aacid :  0.003% Max
8. Non-Volatile content Max 0.0010 Gms./ 100 ml.
9. Permanganata Test :  No discharge of colour in 30 Minutes
10. Colour :   Colourless

 

MIX XYLENE

Prices
1. Density at 15,C by ASTM D- 1 298 :  0.8724 Kg/Litre
2. Flash Point (PMCC) by ASTM D-93 :  27OC
3. Colour ASTM D 853 :  Not darker than solution of 0.003 gm. of K, Cr 2 ol in one litre.
4. Water by Karl Fischer ASTM D 1744 :  200 ppm
5. Sulphur Compounds ASTM D 853 :  Free from H 2 S and So
6. Total Chloride by ASTM D 808 :  Less than 1 ppm
7. Nitrogen ... by Lassaigne's Test :  Nil
8. Heavy Metals as Pb as per I.S. 1699/1974 by Diathiozone Extraction Method Less than 1 ppm

 


 GLC ANALYSIS

Prices
Ethylene Benzene :   Nil
Benzene :   Nil
Toluene :   Nil
Meta Xylene :   Nil
Para Xylene :   82.40%
Ortho Xylene :   17.18%

 

SOLVENT C-IX. (COMMERCIAL GRADE)

Prices
1. Density at 15 oC :   0.875 to 0.885
2. Distillation Range IC
IBP
DP		 :   135 oC Min
:  200 oC Max.
3. Flash point (closed cup) :   76 oF Min.
4. Colour- Saybolt :   +25
5. Aromatic Content :   90% Min.

 

SOLVENT HEPTON

Prices
1. Flash point, oF :   Less than 50
2. Density :    0.71 to 0.77 gm/ml
3. Distillation Range
IBP
FBP 		:   Approx.55 to 65
:  Approx. 1 20 to 130
4. Aliphalics :   60 to 65%
5. Toluene :   28 to 38%

 

CIXON

Prices
1. Specific Gravity at 15.5/15.5 :   0.7 to 0.75
2. Distillation range
IBP oC Min
FBP		 :   65
:  110-120
3. Flash Point :   24+
4. Moisture :   500 PPM Max
5. Aromatic Content :   4% Max by Wt.

 

ORTHO XYLENE

Prices
1. Appearance :   Bright and clear
2. Ortho xylene content :   95% by wt Min.
3. Meta + Paraxylene, wt% :   3 Max
4. Non-Aromatics, wt% :   1.5 Max.
5. Flash Point, oC Min :   24
6. Boiling Point, oC :   144
7. Density
at 4 oC
at 25 o C		 :   0.880 gm/ml
:  0.876 gm/ml
8. Molecular wt :   106

 

MINERAL TURPENTINE OIL - TEXTILE GRADE

Prices
Sr.No. Test Test Method Specification Result
1. Appearance Visual Colourless Clear Liquid Colourless Clear Liquid
2. Density at 15 Degree gm/ml P : 16 To be reported 0.7762
3. Flash Point (Abel) Deg C P : 20 Min 35 37
4. Residue on Evaporation Mg/100 ml P : 29 Max 5 14
5. Aromatic Content Vol % P : 23 Max 40 18
6. Distillation : IBP Deg C
Final Boiling Point Deg C		 P : 18
P : 18		 Min 145
Max 205		 148
192

 

MINERAL TURPENTINE OIL - PAINT GRADE

Prices
Sr.No. Test Test Method Specification Result
1. Appearance Visual Colourless Clear Liquid Colourless Clear Liquid
2. Density at 15 Degree gm/ml P : 16 0.79±0.01 0.7854
3. Flash Point (Abel) Deg C P : 20 Min 35 45
4. Residue on Evaporation Mg/100 ml P : 29 Max 5 16
5. Aromatic Content Vol % P : 23 Max 22 18.1
6. Distillation : IBP Deg C
Final Boiling Point Deg C		 P : 18
P : 18		 Min 150
Max 250		 154
239

 

MINERAL TURPENTINE OIL - IOC KOYALI

Prices
Sr.No. Characteristics Solvent 125/240 Solvent 145/205 Method of Test
1. Colour (Saybolt). Min +21 +20 P : 14
2. Colour (ASTM) Max - - P : 12
3. Density at 15° C. g/ml Not Limited but to be reported P : 16
4. Flash Point (Abel) Min 30°C 35°C P : 20
5. Distillation Range :
a) IBP, Min
b) 50% by Vol. recovered at, in °C
c) 95% by Vol. recovered at, in °C
d) FBP
e) Max Dry Point, Max		 125°C
Not limited but to be reported
Not limited but to be reported
240°C
- 		145°C
Not limited but to be reported
Not limited but to be reported
205°C
-
6. Aromatic Content, % by Vol. 40 Max 40 Max P : 23 or P : 48
7. Sulphur Total, % by mass, Max - - P : 34 or P : 83
8. Copper Strip corrosion for 3 hrs at 50°C Not worse than No.1 P : 15
9. Residue on evaporation mg/100 ml Max 5 5 P : 29 (airjet)


SOLVENT C-9 (Aromatics)

Prices
Sr.No. Analytical Items Method Specification Result
1. Density @ 15°C kg/l ASTM D4052 Min : 860 Max : 890 874.7
2. Colour Saybolt ASTM D156 +25 +30
3. Flash Point (Abel) Deg C IP 170 34 41.5
4. Aromatics % Vol. ASTM D1319 99 >99
5. Distillation @ 760 MMGH ASTM D1078
IBP °C
DP °C
Recovered @ 155°C %		 Min 150
170 - 185
10 		158.1
171.1
Nil

 


Our Products 


   

Home | Profile | Prices | Products | Clients | Transport | Associates | Contact | Enquiry | Tips


Venus Petrochemicals (Bombay) Pvt. Ltd.
27, 1st flr. Minerva Compd., Sewree Bunder Rd., Sewree (East), Mumbai-400 015. , India.
Tel: + 91 - 22 - 5046 3100 / 2416 3182, Fax: + 91 - 22 - 2416 3193 / 5046 3162
Email : info@venuspetrochem.com

Website managed by www.web-mantra.com